Canterbury Wooden Decking Boards

• DeckMark & FSC approved
• Pressure-treated for longevity
• Double-sided boards grooved or smooth
• Made from slow grown & selected softwood
• Finished dimensions after machining 144mm X 27mm
• Decking boards whether smooth or ribbed can be fitted with Anti-slip plates to provide anti-slip protection

We recommend using a 63mm length Exterior-grade Decking Screw for fixing Canterbury decking boards, with two screws per board, per joist. Although many deck screws say 'No pre-drilling required' on the box, we recommend that a countersunk pilot hole be drilled for each screw. It is essential to choose screws that can be used with pressure-treated timber; otherwise, the screws will rust, causing staining and early failure of your deck.

To provide anti-slip protection, both smooth or ribbed sides can be fitted with Anti-Slip Plates, or alternatively, the ribbed side can be retrofitted with Anti-Slip Inserts.

As with all other wooden decking boards, Canterbury decking requires regular sweeping and the occasional hose down. A quick wash removes any build-ups of dead leaves or other organic matter. In addition, regular cleaning helps to reduce the formation of slippery algae or moulds. In spring or early summer, the decking surface should be carefully washed with a pressure washer to remove all the winter's grime build-up. Once the boards have dried out thoroughly, a new treatment of Decking Oil (or, even better, two treatments) will help to restore and protect your deck for the following year.