Charltons Drive & Entrance Gates

Crestala Fencing are stockists & suppliers of Charltons Gates, one of the UK's leading gate manufacturers with an extensive range of Hardwood Iroko & untreated Softwood Drive Way Gates and Entrance Gates. They also make a range of Iroko Hardwood & Treated Softwood  5 & 6 Bar Field Gates.

For more detailed information or to view the extensive full range of Charltons handcrafted gates visit www.charltonsgates.co.uk

If you need any further information about any of Charltons gate styles or want to check prices & order please contact us phone 01892 864646.

Important general gate information.

  •  

     

    It is important that all Charltons untreated Softwood & Ikoko gates are stored, treated & cared for properly prior to hanging.  Please follow this link to  Charltons Gates care & treatment information sheet  for more detailed instructions.  Failure to follow these instructions may invalidate any future claims.

    When the gates are unwrapped, they should be treated straight away before they are exposed to the elements

    Please read the information below in conjunction with the Charltons Gates care & treatment information sheet mentioned above.

    Softwood gates should be treated with a clear preservative such as Cuprinol Trade Wood Preserver Clear or Protek Clear Wood Preserver.  Preservative treatments must be fully dry before applying decorative microporous treatments such as Sikkens Cetol HLS & Filter 7 or Protek Royal Exterior Wood Finnish. Please follow the manufacturer's application instructions fully. Care must be taken to treated all surfaces, particularly the bottom, all end grain & any holes etc for gate hardware.  The gates should be checked & retreated annually in accordance with the treatment manufacturers instructions.

    Iroko gates should be treated with a solvent based treatment.  The gate may need degreasing with methylated spirits prior to any treatment. Use a microporous treatment such as Sikkens Cetol HLS Plus and Filter 7.  Please follow the manufacturer's application instructions fully. Care must be taken to treated all surfaces, particularly the bottom, all end grain & any holes etc for gate hardware. The gates should be checked & retreated annually in accordance with the treatment manufacturers instructions.

    It should be noted that all wooden gates are susceptible to natural movement or shaking (cracks in the timber) as the timber expands & contracts during the normal weathering process. This is not considered to be a defect unless very severe.  We do not recommend using dark stains or paints as they attract heat which may cause additional movement in the timber.

     


Below are a few of the more popular styles available from Charltons.

For prices of some Iroko gates or styles & bespoke sizes not shown, please contact us online or phone 01892 864646.

(Please note: that some of the pictures show gates that have been stained or treated by the customer prior to being fitted.)

Click on photos to enlarge 

Hampton.

Description:

  • Standard sizes listed below only.
  • Pressure treated Scandinavian kiln-dried softwood.
  • This lightweight gate has a slatted top with tongue & groove bottom section.
  • For availability & to confirm the price, please contact us online or phone 01892 864646.

Specifications

Height: 3'6"           Price per gate.
Width:
  • 3'0" £66.48
  • 3'6" £76.39
  • 4'0" £87.01
  • 4'6" £102.70
  • 5'0" £117.08
  • 5'6" £131.42
  • 6'0" £144.59

Beckington.

Description:

  • Made to order.
  • Can be either:
     Untreated Scandinavian kiln-dried softwood
     ready for you to apply a preservative treatment & microporous coloured treatment of your choice.
    OR
    African Iriko hardwood ready for a microporous treatment of your choice.
  • Made to order.
  • Made to measure. Height & width.
  • Can be automated, heavy-duty bottom rail as standard.
  • Maximum height 8'0" ( 2.44m )
  • Can be made in widths up to 9'-0" (2.74m) each gate.
  • For availability & to confirm the price, please contact us  or phone 01892 864646.
Pair of Beckington gates

Specifications

Example prices for Beckington gates in Untreated Softwood. 
Height: 6'0"               Price per pair of gates.
Overall Width of a pair of gates:
  •    
  •    8'0" £1505.63
  •    10'0" £1807.73
  •   12'0" £1823.18

Hilton.

Description:

  • Made to order.
  • Can be either:
     Untreated Scandinavian kiln-dried softwood
     ready for you to apply a preservative treatment & microporous coloured treatment of your choice.
    OR
    African Iriko hardwood ready for a microporous treatment of your choice.
  • Made to measure.
  • Standard height 3'6" (1.067m).
  • Maximum height 8'0" (2.44m)
  • Can be made in widths from 3'-0" up to 6'-0" wide. (each gate).
  • For availability & to confirm the price, please contact us  or phone 01892 864646.

Specifications

Example prices for Hilton gates in Untreated Softwood. 
Height: 3'6"                Price per pair of gates.
Overall Width of a pair of gates:
  •     6'0" £864.27
  •    7'0" £880.38
  •    8'0" £896.46
  •    9'0" £912.57
  •   10'0" £1040.20
  •    11'0" £1059.62
  •    12'0" £1131.46

Manor range of gates. 

Manor, Cotswold, Stafford, Lincoln and Norfolk, Swept top Manor.

Pair of Manor gatesPair of Cotswold gatesPair of Stafford gatesPair of Lincoln gates
Pair of Charltons Norfolk gatesPair of Charltons Swept top Manor gatesPair of Charltons Swept top Concave Manor gatesStile tops for Manor gates

Description:

  • Made to order.
  • Can be either:
     Untreated Scandinavian kiln-dried softwood
     ready for you to apply a preservative treatment & microporous coloured treatment of your choice.
    OR
    African Iriko hardwood ready for a microporous treatment of your choice.
  • Made to measure.
  • Maximum height 8'0" (2.44m)
  • Can be made in widths up to 9'-0" (2.74m) wide. (each gate).
  • For availability & to confirm the price, please contact us  or phone 01892 864646.

Specifications.

Example prices for Flat Top Manor gates in Untreated Softwood. 
Height: 6'0"                Price per pair of gates.
Overall Width of a pair of gates:
  •     6'0" £871.57
  •     8'0" £966.34
  •    10'0" £1193.84
  •    12'0" £1254.91
Example prices for Swept Top Manor gates in Untreated Softwood. 
Height: 6'0"                Price per pair of gates.
Overall Width of a pair of gates:
  •     6'0" £1456.63
  •     8'0" £1551.92
  •    10'0" £1593.95
  •    12'0" £1859.76
Example prices for curved Top Cotswold, Stafford, Lincoln & Norfolk gates in Untreated Softwood. 
Height: 6'0"                Price per pair of gates.
Overall Width of a pair of gates:
  •     6'0" £1334.67
  •     8'0" £1436.20
  •    10'0" £1478.24
  •    12'0" £1744.03

Mells. 

Description:

  • Made to order.
  • Can be either:
     Untreated Scandinavian kiln-dried softwood
     ready for you to apply a preservative treatment & microporous coloured treatment of your choice.
    OR
    African Iriko hardwood ready for a microporous treatment of your choice.
  • Made to measure.
  • Width - 3'0" to 7'0" ( 0.915m to 2.13m ) each gate.
  • Standard height 3'6" ( 1.067m ).
  • Height -up to  8'-0" ( 2.44m ).
  • For availability or to confirm the price, please contact us  or phone 01892 864646.

Specifications

Example prices for Mells gates in Untreated Softwood. 
Height: 3'6"               Price per Pair of gates.
Overall Width of a pair of gates:
  •    6'0" £714.13
  •    7'0" £723.40
  •    8'0" £769.78
  •    9'0" £797.58
  •    10'0" £886.63
  •    12'0" £1011.34

Mendip. 

Description:

  • Made to order.
  • Can be either:
     Untreated Scandinavian kiln-dried softwood
     ready for you to apply a preservative treatment & microporous coloured treatment of your choice.
    OR
    African Iriko hardwood ready for a microporous treatment of your choice.
  • Made to measure.
  • Width - 3'0" to 8'0" ( 0.915m to 2.438m ) each gate.
  • Standard height 3'6" ( 1.067m ).
  • Height -up to  8'-0" ( 2.438m ).
  • For availability or to confirm the price, please contact us  or phone 01892 864646.

Specifications

Example prices for Mendip gates in Untreated Softwood. 
Height: 3'6"                Price per Pair of gates.
Overall Width of a pair of gates:
  •     6'0" £534.60
  •     7'0" £548.82
  •     8'0" £563.10
  •     9'0" £577.18
  •     10'0" £691.87
  •     12'0" £781.39
close

Enter the value you want to convert including units (e.g. 1.5m) or highlight the text on the page.

=
information

Information

This is a text-based metric/imperial converter which means it has some limitations in the format in which it expects the data.

Things like 1' 6", 12ins or 2.3m are fine but don't mix imperial and metric formatting, for example 1.5ins (for an inch and a half) won't work, you can use 1 1/2 ins however.

The units that are recognised are as follows:

  • Imperial units
    • yd, yds, yard, yards
    • ', ft, foot, feet
    • ", in, ins, inch, inches
  • Metric units
    • m, metres
    • cm, cms, centimetres
    • mm, mms, millimetres